Flytec IP4X and IP54 Trunking
Understand the Flytec IP4X Solutions
Flytec IP4X
IPX4 is an IP code, or Ingress Protection Marking. This is a classification standard which rates the degree of protection against intrusion. The 4 means the system is protected against objects larger than 1mm.
The Flytec system is unique in that the IP4X sleeve can be fitted quickly and easily with a 'snap on' connection. This also allows for the sleeve to be fitted retrospectively after installation of the other components.
The Flytec IP4X systems are independently tested to IEC 60529:3013. IP4X systems BS7671 IET IP4X compliant
Gasketed Trunking for External Use.
• All sizes shown in our single and multi compartment sections can be manufactured to prevent ingress of dust and liquids
• The system is designed with anout ward returned flange on the body with an overlapping lid, which is fitted with a neoprene gasket on both sides along its entire length. When installed the gasket is compressed between body and lid by screws which fix into captive bushes on the outward flanges
• Designed and manufactured to meetIP54
• A complete range of accessories, fully gasketed, is available1
Contact our technical team on technical@dpbuildingsystems.co.uk for free advice and help on the best Flytec solution for your needs.
Understand the Flytec IP4X Solutions
Flytec IP4X
IPX4 is an IP code, or Ingress Protection Marking. This is a classification standard which rates the degree of protection against intrusion. The 4 means the system is protected against objects larger than 1mm.
The Flytec system is unique in that the IP4X sleeve can be fitted quickly and easily with a 'snap on' connection. This also allows for the sleeve to be fitted retrospectively after installation of the other components.
