
fischer Ultracut FBS II Concrete screw LUL Approved
The fischer Ultracut FBS II Concrete screw is approved to be used on Transport for London Underground which is the latest product to be approved
FBS II is a high performance removable screw anchor for concrete and masonry
Other LUL Approved Fischer products:-
fischer Resin Anchor R.
fischer Resin bonded anchor R is suitable for anchoring of threaded anchor rods and internally threaded anchors in non-cracked concrete
fischer resin anchor R is vinyl ester glass capsule resin system suitable for non-cracked concrete. It can be installed in dry, wet and also flooded drill holes in accordance with fischer’s installation procedures. Systems can be used with both RG M anchor rods or internally threaded anchor RG MI. The product meets the requirements of LU standard 1-085, and can be installed in sub-surface locations.
FFSC Firestop Compound
A fire seal for service penetrations in walls and floors.
This gypsum based Firestop mortar is supplied as a dry powder which is mixed with water prior to application. Fischer Fixings FFSC Firestop Compound is fully compliant with the requirements of London Underground Standard 1-085 A2 ‘Fire Safety Performance of Materials’.
fischer FZA Zykon anchor
Undercut anchor suitable for steel connections in cracked or non-cracked concrete fischer Zykon FZA is an undercut anchor for fixing into cracked or non-cracked concrete, offering the highest safety. Fixing is available as bolt projecting, through type or internally threaded type, allowing pre-positioned or push-through installation in accordance with fischer’s installation procedures. Anchor is available in wide range of diameters in zinc plated, A4 stainless steel and also high corrosion resistance stainless steel. As this
is an undercut system, anchor and can be installed with small axial spacing and can be positioned close to free edges as per ETA specification. The product meets the requirements of LU standard 1-085, and can be installed in sub-surface locations
The fischer Ultracut FBS II Concrete screw is approved to be used on Transport for London Underground which is the latest product to be approved
FBS II is a high performance removable screw anchor for concrete and masonry
fischer FZEA II Zykon Hammerset anchor
Undercut hammerset anchor suitable for steel connections in cracked or non-cracked concrete
FZEA II is an undercut hammerset anchor with an internal thread for fixing into cracked or non-cracked concrete. Fixing is installed as a pre-positioned anchor directly into concrete in accordance with fischer’s installation procedures. Undercut holes are drilled with FZUB drill bit. FZED plus setting tool is required for correct anchor setting. After correct installation, setting tool marks the sleeve of the anchor with impression marks, allowing easy installation safety check. Anchor is available in M8, M10 and M12 diameters in zinc plated, A4 stainless steel and also high corrosion resistance stainless steel.
As this is a true undercut system, anchor and can be installed with small axial spacing and can be positioned close to free edges as per European Technical Approval specification.
FIS V injection resin system
Fast curing, high performance, styrene free, hybrid vinyl ester resin.
Suitable for connections such as metal studs or reinforcement bars into non-cracked concrete.
Product has European
Technical Approval - ETA.
The product is compliant with LU standard 1-085, and can be installed in sub-surface locations
fischer FWB Wallbolt
Traditional Sheild Anchor for use in Brick, high strength block and non-cracked concrete.
fischer FWB is a traditional internally threaded segmented wall bolt. Fixing is installed as a pre-installed installation. The sheild finishes flush with the surface and can be combined with a bolt head ('L' loosbolt type) with thread and nut and washer ('P'projectiong type) or just the sheild so that a standard metric threaded bolt of the installer's choice can be used. Anchors Available only in zinc plated finish from M6 to M20 threads.
The product meets the requirements of LU standard 1-085, and can be installed in sub-surface locations.
fischer EA II Hammerset anchor
Deformation controlled expansion anchor suitable for steel connections in noncracked concrete
Can be used for multiple use for non-structural applications in cracked concrete. Additional info: EA II is a drop-in hammerset anchor with an internal thread for fixing into non-cracked concrete. Fixing is installed as a pre-positioned anchor directly into concrete in accordance with fischer’s installation procedures. EAW H Plus or EA II S-SDS setting tool is required for correct anchor setting. Anchor is available in M6-M20 diameters in zinc plated and A4 stainless steel. The product meets the requirements of LU standard 1-085, and can be installed in sub-surface location
fischer FIS EM injection resin
High performance injection epoxy resin for structural connections of threaded studs and reinforcing bars to concrete and masonry
This epoxy injection resin system is supplied by fischer fixings
Approved injection resin chemical anchor suitable for various applications where the maximum bond strength is required.
Ideal solution for diamond drilled or large diameter holes. ETA option 1 approval for cracked concrete and also ICC approvals available.
Insulator screw plug - Nylon Fischer S12 R100
For fixing conductor rail insulators to concrete sleepers
Specification: S-TR-0019 Part No. 914P1
DP Building Systems Ltd are a major stockist of LUL Approved Cable Management and Fixing solutions to the rail industry, for more information please visit our dedicated website - https://www.dpbuildingsystems.co.uk/hs2
Contact our technical team on technical@dpbuildingsystems.co.uk for free advice and help on our LUL Approved products, solutions and suppliers.

