Atkore Unistrut 41×82 Back To Back Channel
Unistrut P1001 Back-to-Back Channel is made of steel. Generally used for internal applications. Supplied with a zinc coating to a nominal coat of 20µm. This product is available in plain or continuous slotted in multiple channel combinations and all have 2.5mm serrated lips. Combination channel manufactured from pre-galvanised steel is spot welded.
· Pre-galvanised finish
· Total flexibility in design and construction of assemblies for framing applications
· Meets Z275- BS EN 10346 1.0244 standard
Unistrut Channel channel is a support system manufactured from steel, which is also referred to as Strut, is available in Plain Oil, Hot Dipped Galvanised (HDG), Pre Galvanised and Stainless Steel with different options for thickness; 21mm, 41mm, 62mm, 82mm and larger if required. Length options as standard are 3 or 6 metre (or smaller with our cutting service). Within Unistrut channel range, there is the option for slotted channel which have slots at either 11mm or 14mm. All single Unistrut members are accurately and carefully rolled from mild steel. All multiple members are two or more single Unistrut members spot welded on
The Unistrut Metal Framing System incorporates a wide range of channel nuts and hardware (including: spring nuts, stud nuts, flat washers, square washers, lock washers, qwik washer, hex head cap screws, and more) meant to make fastening channel and fittings together as easy and as quick as possible. Unistrut show that the standard is achieved by rolling the channel with the part number along with the full name of the Standard BS6946:1988, and there Unistrut branding. This is, as it should be, engraved deep into the Channel to ensure that you can clearly identify our product over the inferior product that is creeping into the market place
Unistrut P1001 Back-to-Back Channel is made of steel. Generally used for internal applications. Supplied with a zinc coating to a nominal coat of 20µm. This product is available in plain or continuous slotted in multiple channel combinations and all have 2.5mm serrated lips. Combination channel manufactured from pre-galvanised steel is spot welded.
· Pre-galvanised finish
· Total flexibility in design and construction of assemblies for framing applications
· Meets Z275- BS EN 10346 1.0244 standard
Free of charge technical team available to help find the correct product and solution as well as calculating loads and weights . Cutting Service available for channel, we can cut any qualtity to your required length - simply contact us and we will quote you
There is more information about Unistrut full solutions on HERE or if you would like more information on Unistrut Channel, please contact our technical team on unistrut@dpbuildingsystems.co.uk
