Atkore Flytec IP4X and IP54 Trunking
IPX4 is an IP code, or Ingress Protection Marking. This is a classification standard which rates the degree of protection against intrusion. The 4 means the system is protected against objects larger than 1mm.
The Flytec system is unique in that the IP4X sleeve can be fitted quickly and easily with a 'snap on' connection. This also allows for the sleeve to be fitted retrospectively after installation of the other components
The Flytec IP4X systems are independently tested to IEC 60529:3013
IP4X systems BS7671 IET IP4X compliant.
Gasketed Trunking for External Use
• All sizes shown in our single and multi compartment sections can be manufactured to prevent ingress of dust and liquids
• The system is designed with an outward returned flange on the body with an overlapping lid, which is fitted with a neoprene gasket on both sides along its entire length. When installed the gasket is compressed between body and lid by screws which fix into captive bushes on the outward flanges
• Designed and manufactured to meet IP54
• A complete range of accessories, fully gasketed, is available
IPX4 is an IP code, or Ingress Protection Marking. This is a classification standard which rates the degree of protection against intrusion. The 4 means the system is protected against objects larger than 1mm.
The Flytec system is unique in that the IP4X sleeve can be fitted quickly and easily with a 'snap on' connection. This also allows for the sleeve to be fitted retrospectively after installation of the other components
